ELEMENTI UNO SQUARE KITCHEN MIXER - CHROME

The Uno Square kitchen mixer is designed for efficiency in the kitchen environment with an ergonomic spout height of 237mm and 15 degree operating angle allowing ease of use for tasks like filling of washing large pans, while the clever handle temperature control rotates from upright to forward where the mixer is places against a wall with limited space, ensuring the handle does not hit the splash back.

For More Information, Please Find UNO SQUARE KITCHEN MIXER (robertson.co.nz)

Residential/Light Commercial UseSuitable for Residential/Light Commercial Use (Kitchens, Bathrooms and Laundries in Hotels, Motels and Retirement Villages).

Guarantee5 Year Guarantee on coloured finish

Guarantee10 Year Guarantee

4 Star WELS rating7 litres per minute. Low/Unequal pressure.

5 Star WELS rating5.5 litres per minute. Mains Pressure

Mains PressureSuitable for Mains Pressure.

Multi PressureSuitable for Multi Pressure.

Flawless FinishAdvanced plating provides a durable surface with a long lasting finish

Effortless ControlAdvanced cartridge technology provides a wide operating angle and smooth operation

Forward rotating handleForward rotating handle prevents the lever hitting the splashback.

Swivel SpoutThe Swivel spout provides space, flexibility and ease of use.

Chrome PlateA base of copper is first applied followed by a layer of nickel and then finally a hard gloss coating of chromium to achieve a shiny hard wearing finish.

Electroplated: Gun MetalElectrical current is used to dissolve components into Lacquer that then adhere to the surface.

Electroplated: BlackElectrical current is used to dissolve components into Lacquer that then adhere to the surface.

Electroplated with PVD: Brushed NickelElectrical current is used to dissolve components into Lacquer that then adhere to the surface. A thin metal-spray coating in the form of very thin layers is finally applied using PVD process.

Electroplated with PVD: Brushed BrassElectrical current is used to dissolve components into Lacquer that then adhere to the surface. A thin metal-spray coating in the form of very thin layers is finally applied using PVD process.